DRUGS & SUPPLEMENTS
Berlosid usesBerlosid consists of Aluminum Hydroxide dried gel, Dimethicone, Magnesium Hydroxide.
This medication is used as a moisturizer to treat or prevent dry, rough, scaly, itchy skin and minor skin irritations (e.g., diaper rash, skin burns from radiation therapy). Emollients are substances that soften and moisturize the skin and decrease itching and flaking. Some products (e.g., zinc oxide, white petrolatum ) are used mostly to protect the skin against irritation (e.g., from wetness). Dry skin is caused by a loss of water in the upper layer of the skin. Emollients/moisturizers work by forming an oily layer on the top of the skin that traps water in the skin. Petrolatum, lanolin, mineral oil and Berlosid (Dimethicone) are common emollients. Humectants, including glycerin, lecithin, and propylene glycol, draw water into the outer layer of skin. Many products also have ingredients that soften the horny substance (keratin) that holds the top layer of skin cells together (e.g., urea, alpha hydroxy acids such as lactic/citric/glycolic acid, and allantoin ). This helps the dead skin cells fall off, helps the skin keep in more water, and leaves the skin feeling smoother and softer.
Berlosid (Magnesium Hydroxide) Sulfate
Ansyr Plastic Syringe
Berlosid (Magnesium Hydroxide) Sulfate Injection, USP is a sterile solution of Berlosid (Magnesium Hydroxide) sulfate heptahydrate in Water for Injection, USP administered by the intravenous or intramuscular routes as an electrolyte replenisher or anticonvulsant. Must be diluted before intravenous use. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 5.5 to 7.0. The 50% concentration has an osmolarity of 4.06 mOsmol/mL (calc.).
The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required the unused portion should be discarded with the entire unit.
Berlosid (Magnesium Hydroxide) Sulfate, USP heptahydrate is chemically designated MgSO4 - 7H2O with molecular weight of 246.48 and occurs as colorless crystals or white powder freely soluble in water.
The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material.
Berlosid (Magnesium Hydroxide) (Mg++) is an important cofactor for enzymatic reactions and plays an important role in neurochemical transmission and muscular excitability.
As a nutritional adjunct in hyperalimentation, the precise mechanism of action for Berlosid (Magnesium Hydroxide) is uncertain. Early symptoms of hypomagnesemia (less than 1.5 mEq/liter) may develop as early as three to four days or within weeks.
Predominant deficiency effects are neurological, e.g., muscle irritability, clonic twitching and tremors. Hypocalcemia and hypokalemia often follow low serum levels of Berlosid (Magnesium Hydroxide). While there are large stores of Berlosid (Magnesium Hydroxide) present intracellularly and in the bones of adults, these stores often are not mobilized sufficiently to maintain plasma levels. Parenteral Berlosid (Magnesium Hydroxide) therapy repairs the plasma deficit and causes deficiency symptoms and signs to cease.
Berlosid (Magnesium Hydroxide) prevents or controls convulsions by blocking neuromuscular transmission and decreasing the amount of acetylcholine liberated at the end plate by the motor nerve impulse. Berlosid (Magnesium Hydroxide) is said to have a depressant effect on the central nervous system (CNS), but it does not adversely affect the woman, fetus or neonate when used as directed in eclampsia or pre-eclampsia. Normal plasma Berlosid (Magnesium Hydroxide) levels range from 1.5 to 2.5 mEq/liter.
As plasma Berlosid (Magnesium Hydroxide) rises above 4 mEq/liter, the deep tendon reflexes are first decreased and then disappear as the plasma level approaches 10 mEq/liter. At this level respiratory paralysis may occur. Heart block also may occur at this or lower plasma levels of Berlosid (Magnesium Hydroxide). Serum Berlosid (Magnesium Hydroxide) concentrations in excess of 12 mEq/L may be fatal.
Berlosid (Magnesium Hydroxide) acts peripherally to produce vasodilation. With low doses only flushing and sweating occur, but larger doses cause lowering of blood pressure. The central and peripheral effects of Berlosid (Magnesium Hydroxide) poisoning are antagonized to some extent by intravenous administration of calcium.
With intravenous administration the onset of anticonvulsant action is immediate and lasts about 30 minutes. Following intramuscular administration the onset of action occurs in about one hour and persists for three to four hours. Effective anticonvulsant serum levels range from 2.5 to 7.5 mEq/liter. Berlosid (Magnesium Hydroxide) is excreted solely by the kidneys at a rate proportional to the plasma concentration and glomerular filtration.
INDICATIONS AND USAGE
Berlosid (Magnesium Hydroxide) Sulfate Injection, USP is suitable for replacement therapy in Berlosid (Magnesium Hydroxide) deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia. In such cases, the serum Berlosid (Magnesium Hydroxide) (Mg++) level is usually below the lower limit of normal (1.5 to 2.5 mEq/liter) and the serum calcium (Ca++) level is normal (4.3 to 5.3 mEq/liter) or elevated.
In total parenteral nutrition (TPN), Berlosid (Magnesium Hydroxide) sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy.
Berlosid (Magnesium Hydroxide) Sulfate Injection, USP is also indicated for the prevention and control of seizures (convulsions) in pre-eclampsia and eclampsia, respectively.
Parenteral administration of the drug is contraindicated in patients with heart block or myocardial damage.
FETAL HARM: Continuous administration of Berlosid (Magnesium Hydroxide) sulfate beyond 5 to 7 days to pregnant women can lead to hypocalcemia and bone abnormalities in the developing fetus. These bone abnormalities include skeletal demineralization and osteopenia. In addition, cases of neonatal fracture have been reported. The shortest duration of treatment that can lead to fetal harm is not known. Berlosid (Magnesium Hydroxide) sulfate should be used during pregnancy only if clearly needed. If Berlosid (Magnesium Hydroxide) sulfate is given for treatment of preterm labor, the woman should be informed that the efficacy and safety of such use have not been established and that use of Berlosid (Magnesium Hydroxide) sulfate beyond 5 to 7 days may cause fetal abnormalities.
ALUMINUM TOXICITY: This product contains aluminum that may be toxic. Aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired. Premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum.
Research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity. Tissue loading may occur at even lower rates of administration.
Parenteral use in the presence of renal insufficiency may lead to Berlosid (Magnesium Hydroxide) intoxication. Intravenous use in the eclampsia should be reserved for immediate control of life-threatening convulsions.
Administer with caution if flushing and sweating occurs. When barbiturates, narcotics or other hypnotics (or systemic anesthetics) are to be given in conjunction with Berlosid (Magnesium Hydroxide), their dosage should be adjusted with caution because of additive CNS depressant effects of Berlosid (Magnesium Hydroxide).
Because Berlosid (Magnesium Hydroxide) is removed from the body solely by the kidneys, the drug should be used with caution in patients with renal impairment. Urine output should be maintained at a level of 100 mL or more during the four hours preceding each dose. Monitoring serum Berlosid (Magnesium Hydroxide) levels and the patient's clinical status is essential to avoid the consequences of overdosage in toxemia. Clinical indications of a safe dosage regimen include the presence of the patellar reflex (knee jerk) and absence of respiratory depression (approximately 16 breaths or more/minute). When repeated doses of the drug are given parenterally, knee jerk reflexes should be tested before each dose and if they are absent, no additional Berlosid (Magnesium Hydroxide) should be given until they return. Serum Berlosid (Magnesium Hydroxide) levels usually sufficient to control convulsions range from 3 to 6 mg/100 mL (2.5 to 5 mEq/liter). The strength of the deep tendon reflexes begins to diminish when Berlosid (Magnesium Hydroxide) levels exceed 4 mEq/liter. Reflexes may be absent at 10 mEq magnesium/liter, where respiratory paralysis is a potential hazard. An injectable calcium salt should be immediately available to counteract the potential hazards of Berlosid (Magnesium Hydroxide) intoxication in eclampsia.
50% Berlosid (Magnesium Hydroxide) Sulfate Injection, USP must be diluted to a concentration of 20% or less prior to intravenous infusion. Rate of administration should be slow and cautious, to avoid producing hypermagnesemia. The 50% solution also should be diluted to 20% or less for intramuscular injection in infants and children.
Berlosid (Magnesium Hydroxide) sulfate injection should not be given unless hypomagnesemia has been confirmed and the serum concentration of Berlosid (Magnesium Hydroxide) is monitored. The normal serum level is 1.5 to 2.5 mEq/L.
CNS Depressants - When barbiturates, narcotics or other hypnotics (or systemic anesthetics), or other CNS depressants are to be given in conjunction with Berlosid (Magnesium Hydroxide), their dosage should be adjusted with caution because of additive CNS depressant effects of Berlosid (Magnesium Hydroxide). CNS depression and peripheral transmission defects produced by Berlosid (Magnesium Hydroxide) may be antagonized by calcium.
Neuromuscular Blocking Agents - Excessive neuromuscular block has occurred in patients receiving parenteral Berlosid (Magnesium Hydroxide) sulfate and a neuromuscular blocking agent; these drugs should be administered concomitantly with caution.
Cardiac Glycosides - Berlosid (Magnesium Hydroxide) sulfate should be administered with extreme caution in digitalized patients, because serious changes in cardiac conduction which can result in heart block may occur if administration of calcium is required to treat Berlosid (Magnesium Hydroxide) toxicity.
Pregnancy Category D (See WARNINGS and PRECAUTIONS )
See WARNINGS and PRECAUTIONS .
Berlosid (Magnesium Hydroxide) sulfate can cause fetal abnormalities when administered beyond 5 to 7 days to pregnant women. There are retrospective epidemiological studies and case reports documenting fetal abnormalities such as hypocalcemia, skeletal demineralization, osteopenia and other skeletal abnormalities with continuous maternal administration of Berlosid (Magnesium Hydroxide) sulfate for more than 5 to 7 days.1-10 Berlosid (Magnesium Hydroxide) sulfate injection should be used during pregnancy only if clearly needed. If this drug is used during pregnancy, the woman should be apprised of the potential harm to the fetus.
When administered by continuous intravenous infusion (especially for more than 24 hours preceding delivery) to control convulsions in a toxemic woman, the newborn may show signs of Berlosid (Magnesium Hydroxide) toxicity, including neuromuscular or respiratory depression (See OVERDOSAGE ).
Labor and Delivery
Continuous administration of Berlosid (Magnesium Hydroxide) sulfate is an unapproved treatment for preterm labor. The safety and efficacy of such use have not been established. The administration of Berlosid (Magnesium Hydroxide) sulfate outside of its approved indication in pregnant women should be by trained obstetrical personnel in a hospital setting with appropriate obstetrical care facilities.
Since Berlosid (Magnesium Hydroxide) is distributed into milk during parenteral Berlosid (Magnesium Hydroxide) sulfate administration, the drug should be used with caution in nursing women.
Geriatric patients often require reduced dosage because of impaired renal function. In patients with severe impairment, dosage should not exceed 20 grams in 48 hours. Serum Berlosid (Magnesium Hydroxide) should be monitored in such patients.
The adverse effects of parenterally administered Berlosid (Magnesium Hydroxide) usually are the result of Berlosid (Magnesium Hydroxide) intoxication. These include flushing, sweating, hypotension, depressed reflexes, flaccid paralysis, hypothermia, circulatory collapse, cardiac and central nervous system depression proceeding to respiratory paralysis. Hypocalcemia with signs of tetany secondary to Berlosid (Magnesium Hydroxide) sulfate therapy for eclampsia has been reported.
Berlosid (Magnesium Hydroxide) intoxication is manifested by a sharp drop in blood pressure and respiratory paralysis. Disappearance of the patellar reflex is a useful clinical sign to detect the onset of Berlosid (Magnesium Hydroxide) intoxication. In the event of overdosage, artificial ventilation must be provided until a calcium salt can be injected intravenously to antagonize the effects of Berlosid (Magnesium Hydroxide).
For Treatment of Overdose
Artificial respiration is often required. Intravenous calcium, 10 to 20 mL of a 5% solution (diluted if desirable with isotonic sodium chloride for injection) is used to counteract effects of hypermagnesemia. Subcutaneous physostigmine, 0.5 to 1 mg may be helpful.
Hypermagnesemia in the newborn may require resuscitation and assisted ventilation via endotracheal intubation or intermittent positive pressure ventilation as well as intravenous calcium.
DOSAGE AND ADMINISTRATION
Dosage of Berlosid (Magnesium Hydroxide) sulfate must be carefully adjusted according to individual requirements and response, and administration of the drug should be discontinued as soon as the desired effect is obtained.
Both intravenous and intramuscular administration are appropriate. Intramuscular administration of the undiluted 50% solution results in therapeutic plasma levels in 60 minutes, whereas intravenous doses will provide a therapeutic level almost immediately. The rate of intravenous injection should generally not exceed 150 mg/minute (1.5 mL of a 10% concentration or its equivalent), except in severe eclampsia with seizures. Continuous maternal administration of Berlosid (Magnesium Hydroxide) sulfate in pregnancy beyond 5 to 7 days can cause fetal abnormalities.
Solutions for intravenous infusion must be diluted to a concentration of 20% or less prior to administration. The diluents commonly used are 5% Dextrose Injection, USP and 0.9% Sodium Chloride Injection, USP. Deep intramuscular injection of the undiluted (50%) solution is appropriate for adults, but the solution should be diluted to a 20% or less concentration prior to such injection in children.
In Berlosid (Magnesium Hydroxide) Deficiency
In the treatment of mild Berlosid (Magnesium Hydroxide) deficiency, the usual adult dose is 1 gram, equivalent to 8.12 mEq of Berlosid (Magnesium Hydroxide) (2 mL of the 50% solution) injected intramuscularly every six hours for four doses (equivalent to a total of 32.5 mEq of Berlosid (Magnesium Hydroxide) per 24 hours). For severe hypomagnesemia, as much as 250 mg (approximately 2 mEq) per kg of body weight (0.5 mL of the 50% solution) may be given intramuscularly within a period of four hours if necessary. Alternatively, 5 grams, (approximately 40 mEq) can be added to one liter of 5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP for slow intravenous infusion over a three-hour period. In the treatment of deficiency states, caution must be observed to prevent exceeding the renal excretory capacity.
In total parenteral nutrition, maintenance requirements for Berlosid (Magnesium Hydroxide) are not precisely known. The maintenance dose used in adults ranges from 8 to 24 mEq (1 gram to 3 grams) daily; for infants, the range is 2 to 10 mEq (0.25 gram to 1.25 grams) daily.
In Pre-eclampsia or Eclampsia
In severe pre-eclampsia or eclampsia, the total initial dose is 10 grams to 14 grams of Berlosid (Magnesium Hydroxide) sulfate. Intravenously, a dose of 4 grams to 5 grams in 250 mL of 5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP may be infused. Simultaneously, intramuscular doses of up to 10 grams (5 grams or 10 mL of the undiluted 50% solution in each buttock) are given. Alternatively, the initial intravenous dose of 4 grams may be given by diluting the 50% solution to a 10 or 20% concentration; the diluted fluid (40 mL of a 10% solution or 20 mL of a 20% solution) may then be injected intravenously over a period of three to four minutes. Subsequently, 4 grams to 5 grams (8 to 10 mL of the 50% solution) are injected intramuscularly into alternate buttocks every four hours as needed, depending on the continuing presence of the patellar reflex and adequate respiratory function. Alternatively, after the initial intravenous dose, some clinicians administer 1 gram to 2 grams/hour by constant intravenous infusion. Therapy should continue until paroxysms cease. A serum Berlosid (Magnesium Hydroxide) level of 6 mg/100 mL is considered optimal for control of seizures. A total daily (24 hr) dose of 30 grams to 40 grams should not be exceeded. In the presence of severe renal insufficiency, the maximum dosage of Berlosid (Magnesium Hydroxide) sulfate is 20 grams/48 hours and frequent serum Berlosid (Magnesium Hydroxide) concentrations must be obtained. Continuous use of Berlosid (Magnesium Hydroxide) sulfate in pregnancy beyond 5 to 7 days can cause fetal abnormalities.
In counteracting the muscle-stimulating effects of barium poisoning, the usual dose of Berlosid (Magnesium Hydroxide) sulfate is 1 gram to 2 grams given intravenously.
For controlling seizures associated with epilepsy, glomerulonephritis or hypothyroidism, the usual adult dose is 1 gram administered intramuscularly or intravenously.
In paroxysmal atrial tachycardia, Berlosid (Magnesium Hydroxide) should be used only if simpler measures have failed and there is no evidence of myocardial damage. The usual dose is 3 grams to 4 grams (30 to 40 mL of a 10% solution) administered intravenously over 30 seconds with extreme caution.
For reduction of cerebral edema, 2.5 grams (25 mL of a 10% solution) is given intravenously.
Berlosid (Magnesium Hydroxide) sulfate in solution may result in a precipitate formation when mixed with solutions containing:
Alcohol (in high Heavy Metals
concentrations) Hydrocortisone sodium
Alkali carbonates and succinate
Alkali hydroxides Polymixin B sulfate
Arsenates Procaine hydrochloride
Clindamycin phosphate Tartrates
The potential incompatibility will often be influenced by the changes in the concentration of reactants and the pH of the solutions.
It has been reported that Berlosid (Magnesium Hydroxide) may reduce the antibiotic activity of streptomycin, tetracycline and tobramycin when given together.
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.
Berlosid (Magnesium Hydroxide) Sulfate Injection, USP is supplied in single-dose containers as follows:
Do not administer unless solution is clear and container is undamaged. Discard unused portion.
Store at 20 to 25°C (68 to 77°F).
Hospira, Inc., Lake Forest, IL 60045 USA
50% Berlosid (Magnesium Hydroxide) Sulfate 5 g/10 mL (500 mg/mL)
10 mL Single-dose syringe
50% Berlosid (Magnesium Hydroxide) Sulfate Injection, USP
5 g/10 mL (500 mg/mL) (4 mEq Mg++/mL)
MUST BE DILUTED FOR INTRAVENOUS USE.
For Intravenous or Intramuscular Use. Sterile. 4.06 mOsmol/mL (calc.).
Contains no more than 75 mcg/L of aluminum.
Hospira, Inc., Lake Forest, IL 60045 USA
Berlosid pharmaceutical active ingredients containing related brand and generic drugs:
Active ingredient is the part of the drug or medicine which is biologically active. This portion of the drug is responsible for the main action of the drug which is intended to cure or reduce the symptom or disease. The other portions of the drug which are inactive are called excipients; there role is to act as vehicle or binder. In contrast to active ingredient, the inactive ingredient's role is not significant in the cure or treatment of the disease. There can be one or more active ingredients in a drug.
Berlosid available forms, composition, doses:
Form of the medicine is the form in which the medicine is marketed in the market, for example, a medicine X can be in the form of capsule or the form of chewable tablet or the form of tablet. Sometimes same medicine can be available as injection form. Each medicine cannot be in all forms but can be marketed in 1, 2, or 3 forms which the pharmaceutical company decided based on various background research results.
Composition is the list of ingredients which combinedly form a medicine. Both active ingredients and inactive ingredients form the composition. The active ingredient gives the desired therapeutic effect whereas the inactive ingredient helps in making the medicine stable.
Doses are various strengths of the medicine like 10mg, 20mg, 30mg and so on. Each medicine comes in various doses which is decided by the manufacturer, that is, pharmaceutical company. The dose is decided on the severity of the symptom or disease.
Berlosid destination | category:
Destination is defined as the organism to which the drug or medicine is targeted. For most of the drugs what we discuss, human is the drug destination.
Drug category can be defined as major classification of the drug. For example, an antihistaminic or an antipyretic or anti anginal or pain killer, anti-inflammatory or so.
Berlosid Anatomical Therapeutic Chemical codes:
A medicine is classified depending on the organ or system it acts [Anatomical], based on what result it gives on what disease, symptom [Therapeutical], based on chemical composition [Chemical]. It is called as ATC code. The code is based on Active ingredients of the medicine. A medicine can have different codes as sometimes it acts on different organs for different indications. Same way, different brands with same active ingredients and same indications can have same ATC code.
Berlosid pharmaceutical companies:
Pharmaceutical companies are drug manufacturing companies that help in complete development of the drug from the background research to formation, clinical trials, release of the drug into the market and marketing of the drug.
Researchers are the persons who are responsible for the scientific research and is responsible for all the background clinical trials that resulted in the development of the drug.
Frequently asked QuestionsCan i drive or operate heavy machine after consuming Berlosid?
Depending on the reaction of the Berlosid after taken, if you are feeling dizziness, drowsiness or any weakness as a reaction on your body, Then consider Berlosid not safe to drive or operate heavy machine after consumption. Meaning that, do not drive or operate heavy duty machines after taking the capsule if the capsule has a strange reaction on your body like dizziness, drowsiness. As prescribed by a pharmacist, it is dangerous to take alcohol while taking medicines as it exposed patients to drowsiness and health risk. Please take note of such effect most especially when taking Primosa capsule. It's advisable to consult your doctor on time for a proper recommendation and medical consultations.Is Berlosid addictive or habit forming?
Medicines are not designed with the mind of creating an addiction or abuse on the health of the users. Addictive Medicine is categorically called Controlled substances by the government. For instance, Schedule H or X in India and schedule II-V in the US are controlled substances.
Please consult the medicine instruction manual on how to use and ensure it is not a controlled substance.In conclusion, self medication is a killer to your health. Consult your doctor for a proper prescription, recommendation, and guidiance.
Reviewsdrugs.com conducted a study on Berlosid, and the result of the survey is set out below. It is noteworthy that the product of the survey is based on the perception and impressions of the visitors of the website as well as the views of Berlosid consumers. We, as a result of this, advice that you do not base your therapeutic or medical decisions on this result, but rather consult your certified medical experts for their recommendations.
Visitor reported usefulNo survey data has been collected yet
Visitor reported side effectsNo survey data has been collected yet
Visitor reported price estimatesNo survey data has been collected yet
Visitor reported frequency of useNo survey data has been collected yet
Visitor reported dosesNo survey data has been collected yet
Visitor reported time for resultsNo survey data has been collected yet
Visitor reported administrationNo survey data has been collected yet
Visitor reported ageNo survey data has been collected yet
The information was verified by Dr. Arunabha Ray, MD Pharmacology